As a service we offer the grinding of worn rotor housings.
Above a mileage of 80tkm it is recommended to refurbish the rotor housings.
The price includes the machining of one rotor housing. If you would like to have 2 rotor housings refurbished, please add the article twice to your shopping cart.
What does it benefit?
Grinding of rotor housings is nothing else than honing of cylinders. The running marks are removed, which makes the running-in time after a rebuild more gentle on the apex seals and also considerably shorter. It is not necessary to use softer apex seals which adapt to the running marks, which in turn shortens the mileage significantly! A thinner coating also has a much lower tendency to crack or flake off as is usual with RX8.
The requirement is a completely intact coating. If the coating has already broken off or is no longer present or damaged due to heavy wear or a defect, we can not machine your rotor housing anymore!
We can usually offer RX8 rotor housings in exchange or even as new parts. If you are unsure whether machining is possible, you can also contact us: email@example.com
The rotor housings must be cleaned and dried before shipping, otherwise your shipping service provider may cause delays and a subsequent price increase. We will charge you an additional 50€ for ultrasonic cleaning. With the arrival of your rotor housing this is examined and measured, if damages should be determined whereby a machining is not possible, we compute a treatment lump sum at a value of 50€ and send them back after previous arrangement the housing to you.
Please note that the housing is well packed and sufficiently stamped and sent to the following address:
Processing time varies between 2 and 8 weeks, in the best case please ask in advance!